Playground Springers & Rockers
Available for one, two or four children to use at the same time, with a wide choice of designs. These playground springers are very solidly made from high density HDPE with strong, powder coated springs. They are solidly fixed in the ground with the anchors provided and are an ideal addition to a commercial playground project. They are especially appreciated by younger children.
Our playground springers and seesaws are made in the UK to EN 1176 standards.
Click on any one from the varied selection below!
The “traditional” playground seesaw which you still see in some playgrounds consists of a narrow beam with a central pivot. Formerly they relied on a tyre or similar cushion to soften the impact when the descending child hit the ground. But that was a pretty crude arrangement. Some now have a damping system to better manage the impacts, but we prefer the new spring loaded versions.
These come with one or two springs which are concreted into the ground. And you can have 2 or four child versions – with or without an animal shape.
Safer Surfacing for your Playground Springers and Seesaws
We recommend installing some sort of impact attenuating material around your springer or seesaw. This is a must on any hard surface – asphalt, concrete etc. But if you install them on grass, you will find the ground around becomes worn so ground protection is an added benefit as well as the safety aspect.
Full details of the safer surfacing options available to you.